Antenna Combo GPS + LTE w/ SMA Male Connector
- SKU:
- AB009L
- Availability:
- In stock
- Weight:
- 0.33 LBS
Data Alliance
Antenna Combo GPS + LTE w/ SMA Male Connector
GPS & LTECombo Antenna with Magnetic base. 100-Series cable to SMA Connector
- Directional antenna concentrates the radiation in one direction, to maximize signal strength.
- The limited beamwidth reduces "signal noise" / interference from other WiFi networks and third-party wireless devices, resulting in much greater performance of the device connected to this antenna (especially as compared to omni-directional antennas, which pickup 360-degrees of signal noise.
Compatibility with wireless standards & applications:
- IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM. (Compatible because it is vertically polarized).
- WiMax frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
- LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems. 4G networks
- GSM is 3G wireless (Global System for Mobile Communication)
- Global LTE: 2600 MHz band (2.6GHz)
- GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
- Compatible with Wi-Fi HaLow devices (US), as are all antennas in our Wi-Fi HaLow / Lora antennas subcategory.
- 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
- Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
This directional antenna's range of frequency band compatibility in the 698~960MHz/1710~2690MHz frequency band range, its very low broadband VSWR at 3.0, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.
Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.
|
Item |
Specifications |
||
|
GPS Antenna |
Dielectric Antenna |
Center Frequency |
1575.42±3MHz |
|
Band Width |
CF±5MHz |
||
|
Polarization |
RHCP |
||
|
Gain |
2dBic（Zenith） |
||
|
V.S.W.R |
＜1.5 |
||
|
Impedance |
50Ω |
||
|
LNA |
Gain |
28±2dB |
|
|
Noise Figure |
＜1.5dB |
||
|
V.S.W.R |
＜2.0 |
||
|
Supply Voltage |
2.2~5V DC |
||
|
Current Consumption |
＜15mA |
||
|
LTE Antenna |
Frequency Range |
698~960MHz/1710~2690MHz |
|
|
V.S.W.R |
＜3.0 |
||
|
Polarization |
Linear |
||
|
Gain |
2dBi |
||
|
Impedance |
50Ω |
||
|
Mechanical |
Cable |
100-Series |
|
|
Connector |
SMA |
||
|
Radome Material |
ABS |
||
|
Mounting Method |
Magnet |
||
|
Environmental |
Operating Temperature |
-40℃~+85℃ |
|
|
Relative Humidity |
Up to 95% |
||
|
Vibration |
10 to 55Hz with 1.5mm amplitude 2hours |
||
|
Environmentally Friendly |
ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant |
||
TEST RESULTS for FREQUENCY RANGES:
The antenna exhibits stable and well-controlled electromagnetic behavior in the 2.0 to 2.4 GHz range, maintaining impedance matching close to the system’s nominal 50 Ω. Analysis of the S11 parameter indicates VSWR values approximately between 1.61 and 1.88, corresponding to Return Loss levels suitable for ISM band applications within this frequency range.
| Frequency range | Assessment | Rating | Compatible technologies |
|---|---|---|---|
| 2.0–2.8 GHz | Very good | ★★★★ | Wi-Fi 2.4 GHz (802.11b/g/n), Bluetooth, ZigBee, ISM band IoT devices, wireless sensors and telemetry systems, embedded RF modules, and industrial wireless communication platforms operating in the 2.4 GHz band. Controlled impedance performance referenced to 50 Ω across the evaluated band. VSWR values range approximately between 1.61 and 1.88, corresponding to acceptable Return Loss levels for ISM applications. The 2.0–2.4 GHz segment shows stable electromagnetic behavior, supporting efficient power transfer with moderate and controlled reflection levels. |
SMA Characteristics and Key Information, including connector materials Composition
SMA male mounts directly onto SMA(female) connector of access point, bridge, USB WiFi adapter, or booster. See other magnetic bases that fit this antenna and have antenna cables with other types of connectors.
ALTERNATIVE COMBO ANTENNA OPTIONS:
RELATED PRODUCTS & PAGES:
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMax
- RP-SMA Cables, Antennas and Connectors
- SMA Cables & Adapters
All of our antennas pass QC test before we ship them. This antenna is a special order item that will ship in 3-4 weeks from your order