Combo Antenna High Gain 5G/4G + WiFi + GPS. Cables to SMA, RP-SMA
- SKU:
- AM861c3FT
- Availability:
- In stock
- Weight:
- 0.50 LBS
Data Alliance
Combo Antenna: High-Gain LTE (5dBi) + GPS + WiFi Dual-Band:
- 5dBi Gain for the 5G / 4G antennas: Much higher gain than other antennas of the same dimensions
- 3 Cables to RP-SMA or SMA
- Waterproof / weatherproof (IP68) antenna with through-hole mount and adhesive mount
A three-cable multiband antenna: Three internal antennas that provide coverage for three different wireless devices:
- Three antennas in one: Has three internal antennas and three cables / connectors:
- Use for connections for 5G or 4G LTE, GPS and Dual-Band WiFi (2.4GHz and 5.8 GHz)
- Has three antenna cables to RP-SMA or SMA
- For business customers that need to order less than ten samples for testing, please contact Customer Service
- See another version: Lower-gain, lower-priced version of this antenna
Please contact Customer Service before you purchase, so that we can make sure that the connectors are compatible with your requirements.
Omni-Directional Dual-band MIMO Antenna
- Has three internal antennas, and has three separate antenna cables; cables terminate with SMA-male connectors for LTE and RP-SMA for WiFi and Bluetooth (we can customize connectors for large orders).
- We can customize cable-length for large orders.
- Puck style, permanent mount
- Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.
Mounting / Installation: Stud-mount screw (through-hole mount).
Compatibility with wireless standards & applications:
- This omni directional antenna's range of frequency band compatibility in the 2.4 and 5.8GHz frequency band ranges makes it suitable and compliant for all the following applications:
- IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications.
- WiFi applications: Dual Band 2.4GHz and 5.8 GHz: 802.11AC, 802.11N, 802.11G, 802.11B
- 5G, LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
- US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
- Global LTE: 2600 MHz band (2.6GHz)
- GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
- 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
- Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
- IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, LoRa. (Compatible because it is vertically polarized).
- WiMAX frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
- The GPS antenna has SAW to filter other signals.
- The GPS internal antenna has a metal shield on its bottom side as a ground plane
- Data Alliance's high-quality soldered terminations of SMA and RP-SMA connectors provide a low-loss connection with discontinuities kept to a minimum.
Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.
SPECIFICATIONS |
|||||
GPS Antenna |
Dielectric Antenna |
Center Frequency |
1561~1602MHz |
||
Band Width |
CF±5MHz |
||||
Polarization |
RHCP |
||||
Gain |
2dBic(Zenith) |
||||
V.S.W.R |
<2 |
||||
Impedance |
50Ω |
||||
Axial Ratio |
3dB(max) |
||||
LNA |
Gain |
28±2dB |
|||
Noise Figure |
<1.5dB |
||||
V.S.W.R |
<2.0 |
||||
Supply Voltage |
2.2~5V DC |
||||
Current Consumption |
<15mA |
||||
4G / 5G Antenna |
Frequency Range |
698~960MHz/1710~2690MHz |
|||
V.S.W.R |
<2.5:1 (maximum) |
||||
Polarization |
Vertical |
||||
Gain for the frequency range above |
3.0dBi ~ 4.2dBi |
||||
Impedance |
50Ω |
||||
5G Frequency Bands Coverage |
Frequency Range |
3200 MHz ~ 3800 MHz |
|||
Polarization |
Vertical |
||||
Gain for the frequency range above |
5dBi |
||||
V.S.W.R |
<1.3 |
||||
Impedance |
50Ω |
||||
Mechanical |
Cable |
LMR-100 equivalent double-shielded. See signal loss characteristics below. |
|||
Connectors: Default configuration |
SMA for 5G/4G + GPS |
||||
Radome Material |
UV resistant PC+ABS (black) |
||||
Mounting Method |
Screw |
||||
Environmental |
Operating Temperature |
-40℃~+80℃ |
|||
Relative Humidity |
Up to 95% |
||||
Ingress Protection |
IP68 |
UL certification / rating of the flammability of the antenna housing (ABS):
- Test Method: UL-94
- The flame class of this ABS material is HB.
Beamwidth: H-Plane: 360-degrees: The two internal omni-directional antennas receive and send signals from 360 degrees all around.
Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).
Signal loss in the cable: Per meter:
- 900MHz: 0.75dB/meter
- 1500MHz : 0.99dB/meter
- 2000MHz: 1.16dB/meter
- 3000MHz: 1.438dB/meter
RP-SMA and SMA Connector Characteristics:
ALTERNATIVE COMBO ANTENNA OPTIONS:
RELATED PRODUCTS & PAGES:
- See version of this antenna that includes LTE-AUX connector / cable + GPS (has three antenna cables).
- See version of this antenna that is a single LTE antenna without the auxiliary (has one antenna cable).
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
All of our antennas pass QC test before we ship them.