Combo Antenna LTE+ GPS + WiFi Dual-Band: 3 Cables to RP-SMA or SMA
- SKU:
- AL1G1W1S3FT
- Availability:
- In stock
- Weight:
- 0.50 LBS
Data Alliance
Combo Antenna LTE+ GPS + WiFi Dual-Band: 3 Cables to RP-SMA or SMA
Waterproof / weatherproof antenna with through-hole mount and adhesive mount
A three-cable multiband antenna: Three internal antennas that provide coverage for three different wireless devices:
- Three antennas in one: Has three internal antennas and three cables / connectors:
- Use for connections for LTE / 4G, GPS and Dual-Band WiFi (2.4GHz and 5.8 GHz)
- Has three antenna cables to RP-SMA or SMA
- For business customers that need to order less than ten samples for testing, please contact Customer Service
- See another version: Higher-gain, higher-performance version of this antenna
Please contact Customer Service before you purchase, so that we can make sure that the connectors are compatible with your requirements.
Omni-Directional Dual-band MIMO Antenna
- Has three internal antennas, and has three separate antenna cables; cables terminate with SMA-male connectors for LTE and RP-SMA for WiFi and Bluetooth (we can customize connectors for large orders).
- We can customize cable-length for large orders.
- Puck style, permanent mount
- Typically used as vehicle antenna (cars, trucks) but useful and applicable for many applications.
Mounting / Installation: Stud-mount screw (through-hole mount).
Compatibility with wireless standards & applications:
- This omni directional antenna's range of frequency band compatibility in the 2.4 and 5.8GHz frequency band ranges makes it suitable and compliant for all the following applications:
- IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications.
- WiFi applications: Dal Band 2.4GHz and 5.8 GHz: 802.11AC, 802.11N, 802.11G, 802.11B
- LTE / 4G & GSM /3G: Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
- US domestic LTE: 700 MHz band: AT&T Mobility, Verizon.
- Global LTE: 2600 MHz band (2.6GHz)
- GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
- 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands.
- Non Line of Sight (NLOS): 900 MHz band is best for passing through trees and forests.
- IoT wireless & M2M: Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m, 4G / LTE, 3G / GSM, LoRa. (Compatible because it is vertically polarized).
- WiMAX frequency bands 2300 MHz / 2500 MHz / 2600 MHz (2.3GHz, 2.5GHz, 2.6GHz)
- The GPS antenna has SAW to filter other signals.
- The GPS internal antenna has a metal shield on its bottom side as a ground plane
- Data Alliance's high-quality soldered terminations of SMA and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Conversion to Iridium Satellite Coverage: For all of our antennas that cover the GPS frequency 1.5GHz: We can convert the 1.5GHz GPS antenna to 1.6GHz in order to cover the Iridium (Satellite) frequency. This customization takes about 4 extra weeks in production and will increase the cost of the antenna by $1.75 per antenna.
SPECIFICATIONS |
|||||
GPS Antenna |
Dielectric Antenna |
Center Frequency |
1575.42±3MHz |
||
Band Width |
CF±5MHz |
||||
Polarization |
RHCP |
||||
Gain |
2dBic(Zenith) |
||||
V.S.W.R |
<1.5 |
||||
Impedance |
50Ω |
||||
Axial Ratio |
3dB(max) |
||||
LNA |
Gain |
28±2dB |
|||
Noise Figure |
<1.5dB |
||||
V.S.W.R |
<2.0 |
||||
Supply Voltage |
2.2~5V DC |
||||
Current Consumption |
<15mA |
||||
LTE Antenna |
Frequency Range |
698~960MHz/1710~2690MHz |
|||
V.S.W.R |
<2.0 |
||||
Polarization |
Linear |
||||
Gain |
2.0dBi |
||||
Impedance |
50Ω |
||||
5.9 GHz Antenna |
Frequency Range |
5.9 GHz (optimized for 5.9 GHz) |
|||
Polarization |
Linear |
||||
Gain |
3dBi |
||||
V.S.W.R |
<2.0 |
||||
Impedance |
50Ω |
||||
Mechanical |
Cable |
LMR-100 equivalent double-shielded |
|||
Connector |
SMA |
||||
Material |
ABS |
||||
Mounting Method |
Screw |
||||
Environmental |
Operating Temperature |
-40℃~+85℃ |
|||
Relative Humidity |
Up to 95% |
||||
Ingress Protection |
IP65~IP66 (exclude cable outlet) |
UL certification / rating of the flammability of the antenna housing (ABS):
- Test Method: UL-94
- The flame class of this ABS material is HB.
Beamwidth: H-Plane: 360-degrees: The two internal omni-directional antennas receive and send signals from 360 degrees all around.
Cable is double-shielded, low-loss and very flexible. The cable-type is equivalent or better than LMR-100: Coax with black jacket has the same or better signal-loss-per-meter and flexibility as LMR100, and less attenuation (signal loss) than RG174. The higher quality of the cable of this antenna translates into lower loss/better performance. These antenna cables are rated for outdoor use and are also suitable for indoor use. Recommended tightest continuous bend radius is 1.1 inch (28mm).
- RP SMA and SMA Connector Connector Materials Composition
- SMA male and RP SMA male Connector Materials Composition
ALTERNATIVE COMBO ANTENNA OPTIONS:
RELATED PRODUCTS & PAGES:
- See version of this antenna that includes LTE-AUX connector / cable + GPS (has three antenna cables).
- See version of this antenna that is a single LTE antenna without the auxiliary (has one antenna cable).
- Antenna Mounts & Brackets
- Antennas: How to choose
- Directional Antennas
- Omni-Directional Antennas
- Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX
- RP-SMA Cables, Antennas and Connectors
- SMA Cables & Adapters
All of our antennas pass QC test before we ship them.