Connector Sealant Strip: 1/2 inch wide x 60 inches long COAX-SEAL-104

$3.99
SKU:
COAXSEAL104
Brand:

Availability:
In stock
Weight:
0.07 LBS
COAX-SEAL-104
Write a Review

1 Review

  • 5
    Good weather proofing

    Posted by Unknown on 23rd Sep 2016

    Great to seal up a connector

Connector Sealant Strip

Coax-Seal-104 is simple and inexpensive solution to seal all of your connections for years of protection from moisture and corrosion. Because Moisture leads to inefficient physical connections and a noisy line & Corrosion results in the destruction of the line's ability to carry signals. Once corrosion starts, there is no way to stop it. Poor radiation patterns result and antenna efficiency drop. At higher frequencies, UHF, VHF and microwave ranges, water contamination causes losses that look like dead shorts. For amateur radio buffs, water contamination causes a significant change in VSWR.

  • 1/2 inch wide x 60 inches long
  • Consumer Package: bar coded dispenser package with instructions
  • Seals and protects all types of cable, wire and connectors from moisture and corrosion
  • Adheres to all cable and wire hardware and cable jackets
  • Offers years of protection from the effects of weather
  • Stays flexible, hot or cold; easy to remove
PACKAGING
  • 60" xTz" wide consumer rolls, in retail packaging for pegboard or counter display, with complete instructions.
  • 12' industrial rolls, y2" wide or 1" wide, with complete instructions.
  • Pre-cut strips, Tz" wide, in 10" and 4" lengths, bulk packed.
  • 10" strip in 3 !t" x 5 rl" envelope, with complete instructions.
DESCRIPTION Easily applied, hand-mold-able, tacky black plastic mastic, on peel-away paper backing, suitable for waterproofing a wide variety of connections. Adheres to vinyl and PVC outer jackets. Product is non-conductive, non-contaminating, non-toxic, and UV-stable

APPLICATIONS

Provides a long-lasting, waterproof seal for coaxial cable fittings and many other connections. Use for TV and radio antennas, satellite dishes, CATV, wireless networks, marine electronics, radar and microwave installations, and other applications requiring a moisture-free connection.

VISCOSITY

ASTM D5-52, gm load, 5 sec.=7.0/10.0 mm. Non-hardening, non-oxidizing at ambient temperature

TEMPERATURE RANGE

Optimal application temperature: 40" F. to 110" F.

PERCENT SOLIDS

98%

SOLVENTS

None

OTHER PROPERTIES

Material is non-staining to paint; stays flexible and maintains a waterproof seal over an extreme range of temperatures. Will not crack at -200' F, will not slump at 350" Flasher

OPTIMUM CURE CYCLE

Not curable

APPLICATION EQUIPMENT

Hand applied

Customer Q&A and Comments