Directional WiFi Antenna, 2.4GHz, 3dBi w/ UFL Connector.

Directional WiFi Antenna, 2.4GHz, 3dBi w/ UFL Connector.

Directional 2.4GHz WiFi Antenna w/ UFL Connector.

• Directional antenna concentrates the radiation in one direction, to maximize signal strength.Screw mount
• The limited beamwidth reduces "signal noise" / interference from other WiFi networks and third-party wireless devices, resulting in much greater performance of the device connected to this antenna (especially as compared to omni-directional antennas , which pickup 360-degrees of signal noise.

Compatibility with wireless standards & applications:

• IoT wireless & M2M : Bluetooth , ZigBee , and ISM . Since it is vertically polarized , it is compatible with many machine to machine communication applications, remote monitoring, and telemetry applications. 
• 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B
• Linear polarized, it is suitable for many of today’s machine to machine and communication applications such as telemetry, remote monitoring and mesh networking applications.
• Directional , direct connect antenna tuned to perform on 2.4GHz networks. 

Suitable and compliant for all the above applications because of this antenna's range of frequency band compatibility in the 2.4GHz frequency band range , its low broadband VSWR , and impedance matching to 50 Ohm gear.

SPECIFICATIONS:

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

U.FL Connectors Characteristics and Details: 

• The U.FL female has a socket. U.FL female right-angle type is the most common U.FL connector type found on U.FL cables: 95% of U.FL cables have a U.FL female right-angle connector.
• U.FL male has a pin and is the connector : Male U.FL is the gender that is the "jack" that is embedded directly on to a circuit board on devices such as BlueTooth boards, and ZigBee radios such as XBee, Printed Circuit Boards (PCBs) and internal mini-PCI wireless cards (even though the gender is male, it is the jack U.FL connector. Hence the male connectors / jacks are very rigid.
• The small size of U.FL connectors has made them an excellent fit in Machine-To-Machine (M2M) and IOT (Internet of Things) wireless applications, since they take up very little space in the cramped cases of small devices, such as Bluetooth beacons.
• Gender Determination : Micro-connectors such as U.FL have gender that is counter to typical RF terminology for gender, in that "jack" is more typically synonymous with "female:" A U.FL jack on a board (PCB) is the male U.FL, and the connector that mates with the jack is the female. 
• Connecting and disconnecting U.FL connectors from the jack can be difficult to do properly without damaging the U.FL connector or jack. We offer a U.FL insertion tool to enable you to connect/insert and remove/disconnect easily, without causing any damage to the cable, connector or jack.
• U.FL connector is also known as Ultra Miniature Coax Connectors (UMCC), and enables attaching an external antenna to a U.FL jack/connector on Printed Circuit Boards (PCBs): U.FL female mates with a female HiRose/U.FL jack, also known as U.FL-LP-66 jack/connector.
• U.FL Connectors' Material composition
• Male has a silver-plated phosphor bronze made shell, and a gold-plated brass made contact.
• Female: The shell and contact of Female U.FL connectors are made of phosphor bronze but are silver, and gold-plated respectively. Female U.FL connectors are the ones used in the termination of antenna cable.
• U.FL connectors are precision machined. The gold-plating enables low signal loss .

RELATED ANTENNA VERSIONS

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMax
• UFL Cables, Antennas and Connectors

All of our antennas pass QC test before we ship them.