LTE Antenna Embedded 698~960/1710~2690MHz w/ Cable to UFL

LTE Antenna Embedded 698~960/1710~2690MHz w/ Cable to UFL

Compatibility with wireless standards & applications :

• LTE / 4G & GSM /3G : Broadband design for 4G / LTE and 3G / GSM systems: 4G networks
• GSM is 3G wireless (Global System for Mobile Communication)
• US domestic LTE : 700 MHz band: AT&T Mobility, Verizon.
• GSM bands 824-894 and 1850.2 - 1909.8 (US and Latin America / Mexico)
• 900MHz ISM Band. Can also be made to operate on other VHF and UHF frequencies within the ISM frequency bands .
• Non Line of Sight (NLOS ): 900 MHz band is best for passing through trees and forests.
• IoT wireless & M2M : Compatible with many machine to machine communication applications, remote monitoring, and telemetry applications using LTE-m , 4G / LTE , 3G / GSM , LoRa . (Compatible because it is vertically polarized).

This omni directional antenna's range of frequency band compatibility in the 698~960/1710~2690MHz frequency band range , its low broadband VSWR, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the above applications.

Features & applications

• As access point antenna : Provides signal to clients in any direction (360-degree horizontal beamwidth)
• As client antenna : Connect to an access point in any direction

SPECIFICATIONS:

ROHS 3 & REACH compliant: Antenna, cable and connector are all compliant with ROHS 3 and REACH.

U.FL Connectors Characteristics and Details: 

• U.FL female has a socket. U.FL female right-angle type is the most common U.FL connector type found on U.FL cables: 95% of U.FL cables have a U.FL female right-angle connector.
• U.FL male has a pin and is the connector : Male U.FL is the gender that is the "jack" that is embedded directly on to a circuit board on devices such as BlueTooth boards, and ZigBee radios such as XBee, Printed Circuit Boards (PCBs) and internal mini-PCI wireless cards (even though the gender is male, it is the jack U.FL connector. Hence the male connectors / jacks are very rigid.
• The small size of U.FL connectors has made them an excellent fit in Machine-To-Machine (M2M) and IOT (Internet of Things) wireless applications, since they take up very little space in the cramped cases of small devices, such as Bluetooth beacons.
• Gender Determination : Micro-connectors such as U.FL have gender that is counter to typical RF terminology for gender, in that "jack" is more typically synonymous with "female:" A U.FL jack on a board (PCB) is the male U.FL, and the connector that mates with the jack is the female. 
• Connecting and disconnecting U.FL connectors from the jack can be difficult to do properly without damaging the U.FL connector or jack. We offer a U.FL insertion tool to enable you to connect/insert and remove/disconnect easily, without causing any damage to the cable, connector or jack.
• U.FL connector is also known as Ultra Miniature Coax Connectors (UMCC), and enables attaching an external antenna to a U.FL jack/connector on Printed Circuit Boards (PCBs): U.FL female mates with a female HiRose/U.FL jack, also known as U.FL-LP-66 jack/connector.
• U.FL Connectors' Material composition
• Male has a silver-plated phosphor bronze made shell, and a gold-plated brass made contact.
• Female: The shell and contact of Female U.FL connectors are made of phosphor bronze but are silver, and gold-plated respectively. Female U.FL connectors are the ones used in the termination of antenna cable.
• U.FL connectors are precision machined. The gold-plating enables low signal loss .

RELATED ANTENNA VERSIONS

RELATED PRODUCTS & PAGES:

• Antenna Mounts & Brackets
• Antennas: How to choose
• Directional Antennas
• Omni-Directional Antennas
• Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMax
• UFL Cables, Antennas and Connectors

All of our antennas pass QC test before we ship them.