N-male To RP-SMA male Cable: 3FT, 5FT, 6FT Low-Loss Outdoor Indoor

N-male To RP-SMA male Cable

Antenna Cable with RP-SMA connector on one end and an N-male connector on the other.

• We stock many more RP-SMA-male to N-male cable options.
• This cable is rated for outdoor use and is also suitable for indoor use.
• See our mounts for antennas with N-female connectors.
• The length refers to the cable size between the connectors (not including the connectors).
• Allows interconnection of RP-SMA female and N-female interfaces: Antennas, antenna cables, and wireless devices.
• For coaxial extension (for better antenna positioning), coaxial interface conversion, and coax retrofit applications.

Our cables feature high-quality soldered terminations of Type-N and RP-SMA connectors, ensuring a reliable and low-loss connection with minimal discontinuities. We offer two options for the thickness of the cable (both are double-shielded, with a black jacket):

• The LMR-100-equivalent cable type is not just equivalent to LMR100; it's better. It boasts the same or better signal loss per meter and flexibility as LMR100 and even less attenuation (signal loss) than RG174 and RG178. This superior quality translates into lower loss and better performance, giving you the confidence that your wireless setup is top-notch. The cable is equivalent to LMR-100 in thickness. The LMR-200 cable type has much lower attenuation (signal loss) than LMR-100 and RG58.
• In both cases of coax types, the cables are rated for outdoor use and are also suitable for indoor use.
• The double-shielding of both LMR-100 and LMR-200 enables low signal loss. Both are flexible and easily bendable (LMR-100 is more flexible and bendable). The double-shielding is a major factor in the higher quality of this cable, which translates into lower loss and better performance.
• See a comparison of attenuation (signal loss) for the coax options (100 and 200 series (signal loss).

The temperature range for the operational use of these cable assemblies is as follows:

• Cables with 100-series coax: -22 F ~ +185 F (-30 C ~ +85 C)
• Cables with 200-series coax: -31 F ~ +203 F (-35 C ~ +95 C)
• Cables with 400-series coax: -31 F ~ +203 F (-35 C ~ +95 C)

Compatibility with wireless applications: Our RP-SMA-male to N-male cable' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm gear makes them compatible and compliant for all the following applications:

• All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
• Cellular Wireless LTE / 4G, GSM / 3G WiMAX, 5G: Data and voice applications
• IoT wireless, automation & Machine to Machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
• Compatible with all Helium miners used in North America, including Bobcat miners, Sensecap miners, and all other Helium LongFi miners, as are all of our antenna cables and adapters with RP-SMA-male connectors

N-male Connector Characteristics and Details: Durable, weatherproof connection

• The N-male connector has an interior rubber O-ring, which provides a water-tight seal.
• Nickel-plated brass body for enhanced corrosion resistance: Nickel plating is the most weather-resistant, corrosion-resistant metal plating.
• Our N connectors provide a consistent performance from 900MHz to 12.5 GHz.
• The N-male connector is knurled.
• N-Female diameter is 0.620 inches (1.57 cm). N-male inside diameter is 0.620-inch (1.57 cm)
• N-connector gender is counter-intuitive: Click here for details.
• N-type connectors are the largest RF connector types, usually found on large antennas, especially for outdoor use.
• Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems with critical RF and mechanical performance.

N materials composition:

• Connector Body: Nickel-Plated Brass: The most corrosion-resistant plated brass alloys (better than gold-plated).
• Center Contact: Beryllium Copper, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE
• RP-SMA Connector Characteristics and Details

• RP SMA Dimensions
• RP SMA Connector Material Composition
• RP SMA Features and Key Information

• RP-SMA Gender Determination: Key Points
  • RP-SMA gender is counter-intuitive: Please observe picture & note it is correct.
  • The gender is referring to the pins inside--not the threads. RP-SMA male has threads on inside.
  • RP-SMA male has a socket inside rather than a pin, as you might expect, because the RP stands for "Reverse Polarity." The socket/pin configuration is female when it appears to be male, and vice versa.
  • More details regarding RP-SMA gender determination.

RoHS and REACH compliant: All of our antenna cables and adapters are compliant with RoHS 3 and REACH restrictions on heavy metals and other toxins.

RELATED PRODUCTS

• RP-SMA male to male antenna cables
• RP-SMA adapters
• RP SMA right angle adapters and cables: Cables w/ RP-SMA connectors w/ right-angle & bulkhead nut & washer for the female connector
• RP-SMA extension cables
• N-type Adapters
• N-type male To N-type male Cables
• N-type male to RP SMA male Cables