SMA male Right Angle To SMA female straight (bkd) Cable: 20-Feet
- SKU:
- SmRA20ftSf5
- Availability:
- In stock
- Weight:
- 0.04 LBS
Data Alliance
SMA Extension Cable with Male Right Angle & Female Straight
SMA Antenna Cable: SMA Male Right-Angle To SMA Female (regular straight type): Double-shielded cable
- This 20-FT version is made with LMR-200 equivalent, which is double the diameter of LMR-100, with much lower signal loss and is also double-shielded.
- See shorter length options of this cable.
- One end has an SMA-male right-angle type connector, and the other has an SMA-female connector, the straight type with a bulkhead mount (nut and washer).
- See other SMA Extension Cable options (Male to Female) with straight and right-angle connector variations.
- Data Alliance's high-quality soldered terminations of SMA connectors provide a low-loss connection with discontinuities kept to a minimum.
SMA Connector Characteristics and Details
-
- SMA female connector includes a bulkhead nut and washer:
- With its versatile design, the SMA female connector can be mounted on the wall of a network enclosure for weatherproofing or on a case, panel, or Printed Circuit Board (PCB) for a variety of installation options. Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
- All our cables with SMA and RP-SMA female connectors have bulkhead mount hardware.
- Our standard SMA-female connector (threaded part) is 3/8 inches long. We have a longer option, 14.5mm, which is available. The longer 14.5mm option has an O-ring embedded in the flange to waterproof the port where the cable enters a network enclosure.
- SMA Dimensions
- SMA Connector Material Composition
- SMA Features and Key Information
Antenna Cable Coax is a double-shielded, low-loss, very flexible /easily bendable coax with a black jacket.
- The cable type is equivalent to or better than LMR-100: Coax with black jacket has the same signal-loss-per-meter and flexibility as LMR100 and less attenuation (signal loss) than RG174.
- This cable is rated for outdoor use and is also suitable for indoor use.
- The higher quality of the cable of this antenna translates into lower loss/better performance.
- The cable is equivalent to LMR-100 in thickness.
- The recommended tightest bend radius is 1 inch (28mm).
- SMA female connector includes a bulkhead nut and washer:
The temperature range for operational use of this 100-series coax and the cable assembly is: -22 F ~ +185 F (-30 C ~ +85 C)
Compatibility with wireless standards & applications:
- All WiFi standards: 2.4GHz and 5GHz applications: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A
- Cellular Wireless LTE / 4G, GSM / 3G WiMax: Data and voice applications
- IoT wireless, automation, and machine-to-machine (M2M): Bluetooth, ZigBee, RFID, LoRa, LTE-m, and NB-IoT are suitable for machine-to-machine and communication applications such as telemetry, remote monitoring, and mesh networking applications.
- Compatible with all Helium miners used in Europe, including Bobcat miners, Sensecap miners, and all other Helium LongFi miners, as are all of our antenna cables and adapters with SMA-male connectors
Our SMA extension cables' range of frequency band compatibility (from 0GHz to 18GHz), consistently low broadband VSWR, and impedance matching to 50 Ohm cables make them compatible and compliant with all the above applications.
RoHS 3 and REACH compliant: All of our antenna cables and RF adapters are lead-free and compliant with RoHS 3 and REACH.
RELATED SMA CABLES & ADAPTERS:
- SMA Cables directory
- SMA Adapters
- SMA Extension Cables: Male to Female with straight and/or right angle connectors
Applications of right-angled and straight SMA connector cables
The SMA connector is one of the most widely used radio frequency connectors and can be found in a wide range of devices and components. These right-angled to straight SMA connector cables can be used as extension cabled or antenna cables in the following applications:
- Cellular networking
- GPS
- LoRaWAN
- Wi-Fi
- Ham radio
- Satellite and radio astronomy
- Testing and measurement
Frequently Asked Questions
1. What is the VSWR (Voltage Standing Wave Ratio) for this cable?
The VSWR for this cable is typically less than 1.3:1, indicating excellent signal transfer with minimal reflection and loss.
2. What are the insertion loss characteristics of this cable at different frequencies?
At 1 GHz, the insertion loss is approximately 0.7 dB per meter. At 2.4 GHz, the insertion loss is around 1.0 dB per meter, and at 5 GHz, it is about 1.5 dB per meter.
3. What materials are used for the connectors and the cable jacket?
The connectors are made of brass with gold plating, ensuring good conductivity and corrosion resistance. The cable jacket is made of flexible, durable PVC.
4. What is the bend radius of the SMA male right-angle connector?
The bend radius for the SMA male right-angle connector is 1 inch (25.4 mm), allowing flexibility in tight installations without damaging the cable.
5. How does the cable perform in terms of shielding effectiveness?
The cable has a shielding effectiveness of more than 90 dB, ensuring excellent protection against electromagnetic interference (EMI).
6. Are there any specific installation guidelines to follow for optimal performance?
Ensure that the cable is not kinked or excessively bent during installation. The connectors should be securely tightened to prevent signal loss and maintain a good connection.
7. What testing standards does this cable meet?
This cable meets MIL-C-17 and IEC 61169-15 standards for coaxial cables and connectors, ensuring high reliability and performance in demanding applications.