U.FL to RP-SMA-female right-angle Cable: 2-inch 3-in 4-in 6-in 8" 10-inch
- SKU:
- RSfRA2iUFLL113
- Availability:
- In stock
- Weight:
- 0.03 LBS
Data Alliance
U.FL to RP-SMA-female right-angle Cable
Antenna Cable: U.FL To RP-SMA female right-angle with a bulkhead nut and washer.
- One end has a U.FL connector (mates with U.FL-LP-66), and the other end has a RP-SMA female right-angle type connector.
- 6-inch version has an O-ring embedded in the flange.
We also have U.FL To RP-SMA female straight-type, with these length options::
- 2-inch, 3-inch, 4-inch, 5-inch, 6-inch, 8-inch and 10-inch.
- 12 inch, 14-inch, 16-inch, 18-inch & 20-inch cable length options
U.FL Connectors Characteristics:
- U.FL female has a socket. U.FL male has a pin and is the connector that is the "jack" on a devices such as Bluetooth modules, Printed Circuit Boards (PCBs) and internal mini-PCI wireless cards (even though the gender is male, it is the jack U.FL connector.
- U.FL connector is also known as Ultra Miniature Coax Connectors (UMCC), and enables attaching antenna to a U.FL jack/connector on PCBs.
- U.FL connectors are widely used in M2M and IOT (Internet of Things) wireless applications.
- U.FL cables have a U.FL female connector in 95% of cases.
- Our U.FL connectors are precision machined and gold-plated for low loss.
Coaxial cable type options for our U.FL cables:
- Default cable type that we use for most of our uFL cables is 1.13mm mini-coaxial cable (Impedance: 50 Ohms): This is a very thin and flexible cable, with a black jacket. When connecting U.FL connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible (diameter is 1.13mm). This very thin cable is typically needed in tight spaces inside of enclosures, so that the U.FL connector will snap down on the jack without popping off.
- RG174 coax is thicker and has lower signal loss (attenuation) than 1.13mm while also being flexible/easily bendable. RG174 is better quality than 1.13mm and has a black jacket. The higher quality of this cable translates into lower loss/better performance. This cable is rated for outdoor use and is also suitable for indoor use. Note that LMR-100 coax is too thick in diameter to use with U.FL connectors.
- 1.32mm coax is double-shielded while also very thin (1.32mm diameter).
- 1.37mm coax is another low-loss option.
Special Orders: Please see this note about options for thickness of the coax, and note that we can make special orders with RG174, 1.13mm, 1.32mm and 1.37mm coax, if you want a lower-loss, thicker cable for the shorter versions of this cable. Contact us to make a special order.
Compatibility with wireless protocols and applications:
- All WiFi standards: 2.4GHz and 5GHz applications: Wi-Fi 6, WiFi 6E, 802.11AX, 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A.
- Cellular Wireless LTE / 4G, GSM / 3G WiMax: Data and voice applications.
- IoT wireless & M2M: Bluetooth, ZigBee, RFID, LoRa, LTE-m, NB-IoT.
Our UFL to RP-SMA "pigtail" cables' range of frequency band compatibility (from 0 to 18GHz) and 50 Ohms impedance matching, makes them suitable and compliant for all the above applications.
ROHS 3 and REACH compliant: The entire product is ROHS 3 compliant and free of lead and other heavy metals.
Data Alliance's high-quality soldered terminations of U.FL and RP-SMA connectors with soldering provide a low-loss connection with discontinuities kept to a minimum.
Products Related to U.FL to RP-SMA:
RELATED PAGES: